Ideal Solution For Outdoor Paving
CM2 outdoor floor slabs is the ideal solution for outdoor paving, designed for both public and private use. Easy to install, very easy to inspect any utilities, and easy to reposition in the event of changes to the installation or modifications to the substrate. CM2 has dimensions and mass such as to guarantee the mechanical resistance and longevity demanded by the diverse requirements of outdoor paving:
- Raised paving on adjustable or fixed supports.
- Driveway paving with traditional installation on screed
- Dry installation on gravel, sand or grass
ADVANTAGES of CM2
- easy to install even without adhesives or filler.
- ideal for paving outdoor installations, including raised paving.
- highly resistant to changes in temperature.
- Antislip (R11 - A+B).
- frost and fire-resistant.
- easily inspected and functional, allows installation and maintenance of cabling and pipework.
- easy to clean due to the lack of adhesives and filler.
- high tensile strength.
- good drainage, facilitates the flow of water and rainfall, eliminating harmful stagnation.
- weather resistant.
- removable and reusable.
TIPS FOR LAYING CM2
Please note that all of the formats of the CM2 collection of Ariostea are suitable for laying directly on concrete, gravel, sand and on grass while for the laying in an elevated application it is necessary to take into account certain characteristics according to the format.
For the laying of Ariostea CM2 in the 60x60 format in an elevated application the elevation of the support surface should not exceed 10 cm. It is also recommended to use the central support (5th leg), to distribute properly the different loads and further increase the already high resistance values of the material to the loads. It is also possible to use 60x60 plates with a thickness of 20 mm and a maximum height of 10 cm after application by bonding of a glass fibre netting in the underlying part of the plate for elevations up to 30 cm. For elevations up to 50 cm a galvanized steel plate will be required.
In the latter two cases 4 supports for each plate are enough. For the elevated laying of Ariostea CM2 in the 120x60 format it is recommended not to exceed 2 cm in height using nr 7 supports for 120x60, while for floorings with an elevation between 2 and 10 cm a glass fibre netting is essential and for over 10 cm a galvanized steel plate will be required. For slabs 100x100 CM2 and up to a max 10 cm heights, use 9 pedestals for each slab, one central pedestal included. From 10 cm to 30 cm heights, the application of a fiberglass mesh with glue on the back of the plate is recommended. Up to 50 cm heights, use a sheet of galvanized sheet metal.
Raised paving on adjustable or fixed supports
Easy to install , reusable, removable and easily inspected
For raised paving, the CM2 slabs are provided with load-bearing supports in 100% recycled polypropylene, resistant to acids and the weather. The supports types are as follows: Fixed / Adjustable / Adjustable, self-levelling.
Structure comprises disks of variable width and diameter allowing the installation of the CM2 slabs at heights of 8, 12, 15 or 20 mm.
TIPS FOR FLOATING INSTALLATION
We recommend the use of a central slab support in order to distribute the loads equally.