Ultra Frame System

Ultra Frame System

Dry Envelopes
Logo Ultra

ULTRA FRAME IS A SYSTEM BASED ON THE FOLLOWING GENERIC LAYERS OF OUTER COVERING:

- Building wall in reinforced concrete or brick;
- Insulation with water-repellent layer;
- Adjustable anchoring brackets fixed to the wall with plugs or Halfen connectors;
- Vertically adjusted hooks;
- Load-bearing perimeter frame for load transfer;
- Structural joint;
- Safety mesh (optional);
- Ultra slab;
- Perimeter seal barrier, where appropriate;
- Mechanical retainer if required (recommended).

Sistema Ultra Frame

ULTRA FRAME SYSTEM LAYING SEQUENCE

Sistema Ultra Frame

INDICATIVELY, ULTRA FRAME IS USED MAINLY FOR LARGE-SIZED PROJECTS, WITH SYSTEMATIC MODULE
REPETITION AND IMPORTANT BUILDING HEIGHTS.

A typical installation sequence can be described as follows:
- Fitting the mechanical anchorages to the wall (brackets and plugs or Halfen connectors)
- Sealing and tightening the brackets
- Laying the insulating layer, if required
- Fitting hooks into the cells
- Raising the cells
- Mechanically anchoring the cells to the brackets using the hooks
- Finely adjusting each cell in the two main directions
- Repeating the previous three steps for the next cell
- Closing the ventilation gaps with grilles
- Fitting the terminal elements and window intrados

ULTRA FRAME SITE LOGISTICS

The site logistics include storage for the façade component containers, with suitable surrounding space to allow the moving and extraction of each one, depending on the machinery used for access to the wall to be covered, handling and laying of the façade components; as an example, the following families are indicated:

Access for staff working at a height:Handling and laying:Cell hooking:
- Fixed scaffolding- Crane- Suction cups
- Mobile scaffolding- Fork lift- Cables and eye bolts
- Pantograph- Mobile crane 
- Truck with boom and basket- Monorail 

ULTRA FRAME COVERING SYSTEM SIZE RANGE AND USE

Sistema Ultra Frame

NOTES: The size range is purely indicative, as external coverings can be produced using slabs of all sizes (up to 300x150 cm).

La legenda si riferisce all'altezza fuoriterra dell'edificio - The key refers to the height above ground of the building.

XPS: Extruded polystyrene
EPS: Sintered expanded polystyrene

Need more informations?
Contact us!

Our web site uses cookies to improve your browsing experience.
For more information on cookies and how to control enabling of cookies with your browser settings, please view our "Cookie Policy".